2025 Ditch Witch® Fluid Management FM25X

Information

2025 Ditch Witch® Fluid Management FM25X

SETS THE EFFICIENCY STANDARD

With new design features, improved drilling fluid flow, increased durability and faster mixing cycle and yield times, the FM25X will help meet the needs of any small- to mid-sized HDD project.

Features may include:

POWER
  • The FM5X is powered by a 5-hp Honda engine. The unit supports JT10 and some JT20 applications.
PRODUCTIVITY
  • The FM25X utilizes a hydraulic circuit, providing operators the ability to run two tank systems simultaneously, allowing one unit to mix while the second unit supports onsite drilling operations. The unit features a simple design and multiple configuration options, including curbside and street side, to accommodate a variety of setups for easier transport, and offers fuel fill configurations from both sides of the unit to meet any jobsite need.
MISCELLANEOUS
  • Wet hopper design increases the venturi inlet from 1.25- to 2-inches - a 60 percent larger opening for material flow and superior fluid mixing. And, steep sides incorporated into the design help speed mixing cycles. An updated, internal venturi design optimizes fluid velocity, increasing overall system productivity. Designed with a powder-coated finish, the unit is more durable, economical and resistant to chips, rusting or fading.
SUPERIOR CUSTOMER SUPPORT
  • Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

Photos

Highlights

  • Bossier City, Louisiana
  • 2025
  • Ditch Witch®
  • Fluid Management FM25X
  • D1105
  • Diesel
  • Available
  • 92 in (2.34 m)
  • Tank assembly w/out fill pipe: 68 in (1.73 m) | Tank assembly w/fill pipe: 75 in (1.91 m)

Specifications

  • 2025
  • Ditch Witch®
  • Fluid Management
  • FM25X
  • General
  • D1105
  • Kubota®
  • Medium: Water
  • 3
  • 512 cfm (14.5 m³/min)
  • 68.5 in3 (1.12 L)
  • Manufacturer's gross power rating (per SAE J1995): 24.8 hp (18.5 kW)
  • 3.07 in (78 mm)
  • 3.09 in (78.4 mm)
  • 3,000 rpm
  • Natural
  • EPA Tier 4 / EU Stage IIIb
  • Diesel
  • Indirect
  • Solids addition rate w/metering plate: 30 lb/min (14 kg/m) | Solids addition rate w/out metering plate: 75 lb/min (34 kg/m) | Typical tank mixing time: 7-10 min
  • Sound pressure: 88 dbA | Sound power: 101dbA
  • Flow rate to boring unit: 0-200 gpm (0-750 l/min) | rate: 3.6 gpm (14 l/min)
  • Fluid: 50 psi (3.4 bar) | 2,500 psi (172 bar)
  • Pump discharge rate, max (each pump): 300 gpm (1100 l/min)
  • Suction port diameter: 3 in (76 mm) | Discharge port diameter: 3 in (76 mm)
  • 175 in (4.45 m)
  • 92 in (2.34 m)
  • Tank assembly w/out fill pipe: 68 in (1.73 m) | Tank assembly w/fill pipe: 75 in (1.91 m)
  • Drilling fluid tank capacity (nominal, each tank): 500/950 gal (1890/3596 L)
  • 9.2 gal (35 L)
  • Engine lubrication oil, including filter: 4.2 qt (4 L)
  • Mixing: 1 ft3 (28 L)
  • empty: 2,350 lb (1066 kg) | full of water: 10,700 lb (4853 kg)