2020 J.P. Carlton Professional Tree Equipment Stump Cutters SP5014 TRX

Information

2020 J.P. Carlton Professional Tree Equipment Stump Cutters SP5014 TRX

The new SP5014TRX couples the industry’s best hydraulic controlled self-propelled grinder with the versatility of a rubber track undercarriage.

The SP5014TRX offers two engine options: 27 HP Kohler and 35 HP Vanguard. The SP5014TRX is also available with lever controls, wired remote control, or wireless remote control.

The SP5014TRX uses a rubber high track system that incorporates multiple idler rollers and spring tensioning to keep the track at optimal efficiency for running and tracking characteristics. This track system provides high floatation to minimize ground pressure and disturbance while providing a stable grinding platform and go anywhere traction.

Features may include:
  • Large Cutter Wheel, 21-inch diameter & 1 1/4-inch thick, provides maximum cutting power and flywheel momentum.
  • A Variety of Powerful Engines
  • Feather Touch Hydraulic Controls make the SP5014TRX easy to operate and provide optimum user control.
  • Tapered Roller Bearings on jack shaft and cutter wheel provide long service life and reduced maintenance.
  • Proprietary Rubber Track Undercarriage – provides positive climbing power over the roughest terrain.
  • Spring Tensioned Track – Keeps the tracks on the rollers and allows for easy adjustment.
  • High Track Sprocket – Keeps the track drive sprocket out of debris. Keeps more drive teeth engaged than competitors.
  • More Track Rollers than the competition – keeps the track in place across rough terrain.

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Stump Cutters SP5014 TRX
  • Sheave: 6/3V4.75 | Engagement: Sliding Engine Carriage
  • Available
  • 35 Inches – Narrow Stance | 48 Inches – Wide Stance | of Cut: 50 Inch Arc
  • 56 Inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Stump Cutters
  • SP5014 TRX
  • Stump
  • Sheave: 6/3V4.75 | Engagement: Sliding Engine Carriage
  • Vanguard Series 540000 V-Twin
  • Horsepower: 35 | Maximum RPM: 3600
  • Peak: 52 Ft* Lbs @ 2,400 RPM
  • 60 Cubic Inches (993 cc)
  • Medium: Air
  • Dry Type Canister with Safety Element
  • Spin On | 10 Micron Full Flow
  • AW 32
  • Two
  • Full Pressure w/Full Flow Filter
  • Dexter Torflex 3.500 Pound Cap
  • 12 Volt
  • 650 Cold Cranking Amps
  • Ground Speed Controlled by Hydraulics
  • Cutter Wheel RPM: 1350 Nominal
  • Cutter: 21 Inches with Teeth | Cutter thickness: 1 1/4 Inch – Blanchard Ground
  • 4.09 GPM
  • Drive system: Direct Drive Coupling
  • 34 Inches
  • Track: 4 PSI
  • System Relief: 1850 PSI | Hose: Steel Braided 16,000 PSI Burst – Exceeds SAE 100R2
  • 3" X 12" with 1 3/8" Rod and Replaceable End with Captured Pins
  • Track Foot Print: 7" | Fenders: Bolt on 1/4 inch plate | Jackshaft Sheave: 6/3V10.6 | Jackshaft Sprocket: 8M-40S-62 Gates PolyChain | Cutter Head Sprocket: 8M-40S-62 Gates PolyChain | Jackshaft: 1 11/16 Inch | Cutter Head Shaft: 1 11/16 Inch
  • 95 Inches
  • 56 Inches
  • 35 Inches – Narrow Stance | 48 Inches – Wide Stance | of Cut: 50 Inch Arc
  • 3.4 Inches (85.5 mm) | Type: Cast Iron Sleeve
  • 3.4 Inches (85.5 mm)
  • 42"
  • Rubber track
  • Curb: 13 Inches
  • Displacement: .267 cu in (4.3 cc)
  • 10 Gallons
  • Tank 4 Gallon
  • Engine: 77.8 oz
  • 2215 pounds | Engine: 125 Lbs. (56.8 KG)
  • Valves: Overhead | Valve: Series Type with Fine Metering | Check Valves: Cartridge Counterbalance Valves in Lift, Swing, and Drive Circuits | Chip Guards: Rubber and Metal
  • Drive: 3 Band 5V670 | Belt and Chain Shields: Metal Bolt On
  • Swing: Adjustable Tapered Roller Bearings