2020 J.P. Carlton Professional Tree Equipment Wood Chippers 1290 Series (9 In.)

Information

2020 J.P. Carlton Professional Tree Equipment Wood Chippers 1290 Series (9 In.)

The J.P. Carlton 1290 Wood Chipper is powerful and portable. The machine provides the perfect balance of capability and power for crews doing a variety of trimming operations. With its 12" x 9" throat opening, dual top and bottom feed rollers, and high torque feed motors, the J.P. Carlton 1290 offers the reliability that trimming crews can count everyday.

Able to withstand all the punishment customers can dish out, the 1290 features high-end design elements like concealed wiring, integrated manifold hydraulics with electronic control, sliding engine disk engagement and more.

For Durability and Dependability nothing compares to J.P. Carlton.

Features may include:
  • Heavy Duty 1 ½ ” Feeder Bar
  • 12" x 9" Feed Opening makes feeding the bigger branches and limb material easy.
  • Heavy Duty 2,000 pound capacity tongue jack
  • Folding Feed Table
  • Swivel Discharge quickly and easily allows the operator to fill chip trucks corner to corner, or direct the chips to a precise place on the lot.
  • Locking Fuel and Hydraulic Tanks are sleekly designed to fit neatly within the confines of the frame. Locking caps prevent vandalism.
  • Taillights Mounted Down, out of harms way.
  • 48" Wide Feed Chute takes the big tops, requires less trimming by the crew!
  • Two Speed Four Wheel Drive Self-Propelled and Two Speed Rubber Track Undercarriages Available.

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers 1290 Series (9 In.)
  • Sheave: 6/3V5.6 | Channel Mnts: Sliding Positive Lock Engagement
  • Available
  • 56 inches
  • 67 inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers
  • 1290 Series (9 In.)
  • Brush
  • Sheave: 6/3V5.6 | Channel Mnts: Sliding Positive Lock Engagement
  • Vanguard 35 HP V-Twin
  • Horsepower: 35 HP | Maximum: 3600 RPM
  • 53 Ft Lbs
  • 993cc
  • Medium: Forced Air
  • Two Stage Dry Type
  • 10 Micron Return with Suction Strainer
  • Briggs | AW32
  • Two | Lift: 2” x 10” with 1” attachment
  • 85.5 mm
  • 86.5 mm
  • Dexter Torflex 5200-Pound Cap | Mounts: 1/2"Plate
  • 12 Volt
  • 29HVD 650 CCA | Box: Marine Battery Box
  • 225/75R15 Ld Rng C 1760 # @ 50 PSI
  • 225/75R15 Ld Rng C 1760 # @ 50 PSI
  • Wheel: 1440-RPM Nominal
  • Drive: Live – Driven off engine
  • 5.41 GPM
  • Displacement: .329 in cu/rev | Drive System: Direct Drive off Engine Mount
  • System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
  • Jackshaft Sheave: 2B 9.4 | Cutter Head Shaft: 2 1/2 inches | Disk Shaft: 3 1/2 inch Removable | Knife: 10-3/16” x 4 x1/2” | Anvil: 4” x 8-7/8”x 1/2” AR400 | Chip Throwers: Two 3/8”x 4” x 4” x 11” long | Throat Opening. 12″ x 9″ | Main Trailer Tongue: 2" x 4" with 1/4" wall | Main Trailer Frame: C4 X 5.4 Channel
  • Diameter: 30 inches | Thickness: 1 1/2 inches
  • Disk Bearings: 2 7/16 inches Tapered Roller | Feed Roller Bearings: 2 inch Ball | Feed Roller Shaft: 2 inches Engagement | Feed Rollers: 10 1/4” x 11.5”
  • 132 inches
  • 67 inches
  • 56 inches
  • 8" Height Adjustable 2″ Bulldog | Plate: 3/4″ Plate adjustable 8″ Up/Down
  • Light Brackets: 3/16" with hidden wiring
  • 9 Gallons | Tank: 10 gauge with baffles rubber mtd | Hydraulic Tank: 10 gauge with baffles rubber mtd
  • Hydraulic Tank: 6 Gallons | Engine: 2.3 Quarts | Tank Capacity: 9 Gallons
  • 2930 Pounds | Engine: 94 Lbs (43 KG)
  • Disk Sheave: 6/3V14.0 | Jack Stand: 2000 # Cap Screw Type Swing Up | Valve: Series Type | Drive Belt: 6 Band 6/3V750 | Clutch: Sliding Positive Lock Engagement | Disk Balance: Precision High Speed Balanced | Number of Knives: 2 | Springs: Two 15" Tight Wound Powder Coated | Slide Bearings. Two 1" Flange Mount | Infeed Chute: 10 Gauge with 1″ tube frame | Folding Infeed Tray: 10 Gauge with 1” tube frame | Folding Tray Lock: 3/16” thk.
  • Motors: Top- 32.7 in cu | Feed Lift: 1 inch Flanged Ball | Autofeed: Digital Fully Adjustable | Feed Rate: 100 Feet Per Minute | Feeder Bar: 1 1/2" OD x 1/8" wall – removable
  • 360 Adjustable Swivel w/Deflector | Discharge Chute: 10 gauge neck with 14-gauge discharge | Lock: 3/4" Spring Loaded Pin