2020 J.P. Carlton Professional Tree Equipment Wood Chippers 1712 (12 In.)

Information

2020 J.P. Carlton Professional Tree Equipment Wood Chippers 1712 (12 In.)

The J.P. Carlton 1712 Apache Drum Chipper is the smallest capacity chipper in the Apache series. The 1712 Apache features a 17" by 12" opening utilizing a single oversized feed wheel to handle the material. This single feed wheel and drum cutting action allow the 1712 to handle the hard to feed fibrous materials like palm fronds. J.P. Carlton’s exclusive Air Vortex Control channel’s and accelerates the discharge air – making sure to get the material out of the chipper and into the truck.

The J.P. Carlton 1712 Apache comes standard with a Kubota Diesel Engine, live hydraulics, hydraulic lift and crush cylinder, and digital adjustable autofeed control.

With the most standard features, solid construction, and superior performance – the J.P. Carlton 1712 Apache is the easy choice when considering a 12" capacity drum chipper.

Features may include:
  • Massive 15 3/4" Feed Wheel pulls in the logs and brush with ease
  • Two Hydraulic Feed Motors provide high torque to pull in entire tops
  • Hydraulic Lift and Crush Cylinder provides crushing power when necessary and allows easy access to the anvil
  • Kubota Turbo Diesel gives reliable long lasting efficient power
  • Digital Adjustable Autofeed controls the feed of the material into the drum minimizing operator intervention
  • Live Hydraulics run directly off the engine allowing all hydraulics to function without the drum engaged
  • Spring and Rubber Mounted Tanks are isolated from the vibrations created during chipping and towing
  • Variable Feed Rate allows the operator to slow down the feed when desired

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers 1712 (12 In.)
  • Sheave: 4/5V9.25 | Channel Mounts: 4" Channel with 5/16" web
  • Available
  • 56 inches | Drum w/Fans: 20 inches
  • 93 inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers
  • 1712 (12 In.)
  • Brush
  • Sheave: 4/5V9.25 | Channel Mounts: 4" Channel with 5/16" web
  • Kubota Turbo Charged Diesel V3800-CR-TE4B
  • Horsepower: 74 HP | Maximum RPM: 2200 RPM
  • 240 Ft Lbs
  • 202.53 Cubic Inches (3.3L)
  • Medium: Liquid Water/Antifreeze Mixture
  • Two Stage Dry Type
  • Engine: Full Flow Spin On | Hydraulic: 10 Micron In Tank Return
  • Engine: SAE 10W40 CD Grade or Higher | Hydraulic: AW32
  • Four | Lift: 2 x 12 with 1" attachments
  • Oil Pres, Water Temp, Amp, Digital Tach
  • Stein
  • 3.86 Inches (98 mm)
  • 4.33 Inches (110 mm)
  • Dexter Spring 8,000 Pound Cap
  • 12 Volt
  • 29HVD 650 CCA | Box: Marine Grade
  • Electric with Breakaway Switch
  • Cutter Wheel RPM: 1350 Nominal | Drum: 2000 RPM
  • Tank 3/16" wall Steel tank
  • 8.8 GPM Total | Drive: Live – Driven off engine
  • Displacement: .8 Cu in | Drive System: Direct Drive off Engine Mount
  • Aluminum with Electric Fan
  • System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
  • 215/75R17.5 Ld Rng H 4805 Pd @ 125PSI
  • 215/75R17.5 Ld Rng H 4805 Pd @ 125PSI
  • Jackshaft Sheave: 4/5V11.8 | Drum Bearings: 2 7/16 inches Tapered Roller | Feed Roller Bearings: 2 inches Ball Bearing | Main Trailer Tongue: 3" x 6" with 3/8" wall | Main Trailer Frame: 2" x 6" with 3/16" wall | Light Brackets: 3/16" with hidden wiring | Drum Diameter: 20-3/4 inches | Knife: 9 x 4 1/2 x 5/8" | Anvil: 16 1/2 x 4 1/2 x 1/2 AR400 | Drum Fans: 6 – 1/2" x 3" x 5.75" | Throat Opening: 12" x 17" | Infeed Hopper Opening: 29" x 48"
  • 186 inches
  • 93 inches
  • 56 inches | Drum w/Fans: 20 inches
  • Five Inch Height Adjustable Pintle | Plate: 3/4" Plate adjustable 9" Up/Down
  • Shaft: 2 7/16 inches
  • 40 Gallons | Tank: 3/16" thick Steel Tank
  • Engine: 14 Quarts | Hydraulic Tank: 9 Gallons
  • 6920 Pounds
  • Engine: Jack Stand: 5000 # Cap Screw Type Swing Up | Hydraulic Valve: Energy | Drive Belt: 4/5V1120 | Springs: 30" Tight Wound Powder Coated | Slide Bearings: Four 1" Hardened | Infeed Chute: 3/16" thick Steel | Fenders: 3/16 Steel plate | Disk Balance: Precision High Speed Balanced | Number of Knives: 2
  • Motors: Two 32 Cubic Inch Displacement | Autofeed: Digital, Fully Adjustable | Feed Rate: 100 Feet Per Minute | Feed Roller: 15 3/4" Dia | Bar: 1 1/2" OD x 1/8" wall – removable
  • Adjustable Swivel | Discharge Chute: 10 gauge | Lock: 3/4" Spring Loaded Pin