2020 J.P. Carlton Professional Tree Equipment Wood Chippers 1712 Series (12 In.)

Information

2020 J.P. Carlton Professional Tree Equipment Wood Chippers 1712 Series (12 In.)

J.P. Carlton offers a variety of 12-inch chipper models to tackle almost any project.

The J.P. Carlton Model 1712 Wood Chipper provides an ideal balance of capacity, economy, and portability. At just 5500 pounds the 1712 is easily towable by smaller chip trucks. The lightweight and compact size of the 1712 makes it highly maneuverable in tight places.

J.P. Carlton Model 1712 incorporates many design features to make it a highly productive 12-inch capacity chipper. The 48-inch by 28-inch infeed opening allows the 1712 to swallow tops with little or no trimming. The 10½-inch diameter feed rollers accept the wood with minimal fuss or wrapping. The industry’s largest 32-cubic-inch displacement hydraulic feed motors provide the power to pull and collapse limbs and tops.

Features may include:
  • Tail Lights are protected by the infeed tray during chipping.
  • Swivel Discharge allows the operator to fill the truck corner to corner, or easily direct the chips to a precise place on the lot.
  • Heavy Duty 1 ½” Feeder Bar
  • 12" x 17" Throat Opening, easily handles the most difficult materials.
  • 48" Wide Feed Chute takes the big tops, requires less trimming by the crew!
  • Live Hydraulics run directly off the engine allowing the operator to engage all hydraulic functions without the disk being engaged.
  • 74 HP Arborist Package Kubota Diesel, specifically designed for use on a chipper and includes: radiator debris screen, live hydraulic pump hook up, locking side panels, easy access air cleaner mounted to the rear of the engine to keep it as far away from the dust as possible.
  • Heavy-Duty Infeed Table and Folding Tray

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers 1712 Series (12 In.)
  • Sheave: 4/5V8.5 | Channel Mnts: 4" Channel with 5/16″ web
  • Available
  • 56 inches
  • 93 inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers
  • 1712 Series (12 In.)
  • Brush
  • Sheave: 4/5V8.5 | Channel Mnts: 4" Channel with 5/16″ web
  • Kubota Turbo Charged Diesel V3800-CR-TE4B
  • Horsepower: 74 HP | Maximum RPM: 2200 RPM
  • 240 Ft Lbs
  • 230 Cubic Inches (3.7L)
  • Medium: Liquid Water/Antifreeze Mixture
  • Two Stage Dry Type
  • Engine: Full Flow Spin On | 10 Micron Absolute in Tank Return withSuction Screen
  • Engine: SAE 10W40 CD Grade or Higher | AW32
  • Four | Lift: 2 x 12 with 1" attachments
  • Oil Pres, Water Temp, Amp, Digital Tach
  • Stein
  • 3.93 Inches (100 mm)
  • 4.73 Inches (120 mm)
  • Dexter Torflex 7,000 Pound Cap
  • 12 Volt
  • 29HVD 650 CCA | Box: 3/16" checker plate
  • Electric with Breakaway Switch
  • 235/80R16 Ld Rng H 4805 Pd @ 125PSI
  • 235/80R16 Ld Rng H 4805 Pd @ 125PSI
  • Wheel: 1180 RPM
  • Drive: Live – Driven off engine | Hydraulic Tank: 1/4" Steel Fabricated Tank
  • 8.8 GPM Total | 4.4 GPM to Each Motor
  • Displacement: .8 Cu in | Drive System: Direct Drive off Engine Mount
  • System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
  • Jackshaft Sheave: 4/5V14.0 | Disk Bearings: 2 7/16 inches Tapered Roller | Feed Roller Bearings: 2 inches Ball Bearing | Knife: 7 1/4 x 4 x 1/2" and 6 3/32 x 4 x 1/2 | Anvil: 4 1/2″ x 11" x 1/2" AR400 | Chip Throwers: Two 3/8" x 4" x 4" x 11" long | Throat Opening: 12" x 17" | Infeed Hopper Opening: 29" x 48" | Feed Rollers: Two 10 1/2" x 16 1/4" | Main Trailer Tongue: 3"x 4" with 1/4" wall | Main Trailer Frame: 2"x 4" with 3/16" wall | Infeed Chute: 10ga with 2" x 2" x 1/8" tube frame | Folding Infeed Tray: 10ga with 4" x 1 1/2" x 3/16" bracing | Fenders: 3/16" checker plate
  • Diameter: 38 1/2 inches | Thickness: 1.5 inches
  • 186 inches
  • 93 inches
  • 56 inches
  • 9" Height Adjustable Pintle | Plate: 3/4" Plate adjustable 9″ Up/Down
  • Shaft: 4 inches
  • 40 Gallons | Tank: Molded Plastic
  • 14 Quarts | Hydraulic Tank: 9 Gallons
  • 5500 Pounds Pounds | Engine: 94 Lbs (43 KG)
  • Engine: Jack Stand: 2000 # Cap Screw Type Swing Up | Hydraulic Valve: Series Type | Drive Belt: 4/5V950 with Aramid Fiber Cord | Disk Balance: Precision High Speed Balanced | Number of Knives: 4 | Valve: Energy | Springs: 19" Tight Wound Powder Coated | Slide Bearings : Four 1" Hardened | Folding Tray Lock: 3/4" Spring Loaded Pin | Light Brackets: 3/16" with hidden wiring
  • Feed Motors: Two 32 Cubic Inch Displacement | Autofeed: Digital, Fully Adjustable | Feed Rate: 100 Feet Per Minute | Bar: 1 1/2" OD x 1/8" wall – removable
  • Adjustable Swivel | Chute: 10 gauge | Lock: 3/4" Spring Loaded Pin