2020 J.P. Carlton Professional Tree Equipment Wood Chippers 2012 Series (12 In.)

Information

2020 J.P. Carlton Professional Tree Equipment Wood Chippers 2012 Series (12 In.)

J.P. Carlton offers a variety of 12-inch chipper models to tackle almost any project.

The J.P. Carlton Model 2012 wood chipper incorporates numerous standard features found only as options on competitive machines. Standard features like live hydraulics, dual lift cylinders, reversing auto feed, Kevlar belts and Dupont Imron paint, put the 2012 in a class by itself. High horsepower diesel engines, a 20-by 12-inch throat opening and a 64-inch wide infeed give the J.P. Carlton 2012 massive capacity. Plus J.P. Carlton wood chippers are built to the highest standards providing contractors the operation and reliability they need.

Features may include:
  • LED Taillights mounted high on the infeed out of harms way. All J.P. Carlton chippers come with heavy duty taillight covers as standard equipment . All the wiring runs inside the frame to give the machine a neater appearance and keep wires clear of damage.
  • Heavy Duty Planetary Winch with cable and choker is an option on all J.P. Carlton Chippers. This planetary winch has two speeds and the strongest pulling power available on a chipper.
  • Hand Crank Swivel Discharge Chute allows the operator to easily fill the truck corner to corner, or easily direct the chips to a precise place on the lot.
  • Standard Hydraulic Cooler keeps the system running at ideal temperature. This increases both performance and component life.
  • Hand Crank Height Adjustable Discharge Chute allows the operator to quickly adjust the discharge perfectly for any truck.
  • Heavy-Duty 1 ½” Feeder Bar
  • 20"x 12" Throat Opening, largest in its class, easily handles the most difficult materials.
  • 64" Wide Infeed Chute takes the big tops, requires less trimming by the crew! A 48" Wide Chute is available when a more compact chipper is desired.
  • Live Hydraulics run directly off the engine allowing the operator to engage all hydraulic functions without the disk being engaged.
  • Engine Options include Kubota 116 HP and GM 135 HP. These arborist engine packages are specifically designed for use on a chipper and include heavy-duty radiator screens, live hydraulic pump hook ups, locking side panels, and easy access to filters and fluids.
  • Heavy-Duty Infeed Table and Folding Tray.
  • Locking Fuel and Hydraulic Tanks sit down in the frame for maximum capacity and a clean design.

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers 2012 Series (12 In.)
  • Sheave: 6/5V7.1 | Channel Mnts: 4" Channel with 5/16" web
  • Available
  • 56 inches
  • 100 inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers
  • 2012 Series (12 In.)
  • Brush
  • Sheave: 6/5V7.1 | Channel Mnts: 4" Channel with 5/16" web
  • Kubota
  • Horsepower: 116 HP | Maximum RPM: 2600 RPM
  • 318 Ft Lbs (431 NM)
  • 230 Cubic Inches (3.769L)
  • Medium: Liquid Water/Antifreeze Mixture
  • Two Stage Dry Type
  • Engine: Full Flow Spin On | Hydraulic: 10 Micron Return with Suction Strainer
  • 15W-40 Rotella (CJ-4 Rating) | Hydraulic: AW32
  • Four | Lift: Two 2 x 12 with 1" attachments
  • Oil Pres, Water Temp, Amp, Digital Tach
  • Stein 11 1/2 ” Over Center
  • 3.94 Inches (100 mm)
  • 4.72 Inches (120 mm)
  • Dexter Torflex 8,000 Pound Cap | Mounts: 1/2" Plate
  • 12 Volt
  • 29HVD 650 CCA | Box: 10 gauge checker plate – lockable
  • Electric with Breakaway Switch
  • 215/75R17.5 Ld Rng H 4805 # @125 PSI
  • 215/75R17.5 Ld Rng H 4805 # @125 PSI
  • Cutter Wheel RPM: 1350 Nominal | Wheel: 1180 RPM
  • Variable Pressure Compensated | Pressure Compensated Adjustable
  • Displacement: .87 in cu/rev (14.4cm cu/rev) | Drive System: Direct Drive off Engine Mount | Drive: Live – Driven off engine
  • Tank: 3/16" gauge with baffles rubber mtd
  • System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
  • Jackshaft Sheave: 6/5V15 | Knife: 7 1/4" x 4 1/2" x 1/2" | Anvil: 4 1/2" x 12 1/2" x 1/2" AR400 | Chip Throwers: Two 3/8" x 4" x 4" x 12" long | Throat Opening: 12 3/4" x 20" | Cutter Head Shaft: 4" | Main Trailer Tongue: 4" x 6" with 3/8" wall | Main Trailer Frame: 2" x 6" with 1/4" wall | Telescoping Tongue: 3" x 52 with3/8" wall by 72" long | Infeed Chute: 3/16" with 2" x 2" x 1/4" tube frame | Folding Infeed Tray: 3/16" with 4" x 1 1/2 "x 3/16" bracing | Fenders: 3/16" checker plate | Bar: 1 1/2" OD x 1/8" wall – removable | Radiator Guards: 2" x 4" with 3/16" wall | Light Brackets: 3/16" with hidden wiring
  • Diameter: 40 inches | Thickness: 2 inches
  • Disk Bearings: 2 7/16 inches Tapered Roller | Feed Roller Bearings: 2 inches Tapered Roller
  • 186 inches
  • 100 inches
  • 56 inches
  • Five Inch Height Adjustable Pintle | Plate: 3/4" Plate adjustable 5" Up/Down
  • Shaft: 4 inches
  • 40 Gallons | Tank: 3/16" with baffles rubber mtd
  • 14 Quarts | Hydraulic Tank: 13 Gallons
  • 7200 Pounds
  • Engine: Jack Stand: 5000 # Cap Screw Type Swing Up | Hydraulic Valve: Series Type | Drive Belt: 6/5V1000 Kevlar Construction | Disk Balance: Precision High Speed Balanced | Number of Knives: 4 | Springs: Two 19″ Tight Wound Powder Coated | Slide Bearings: Four 1" Hardened | Folding Tray Lock: 3/4" Spring Loaded Pin
  • Motors: 32 Cubic Inch Displacement | Autofeed: Reversing, Digital, Fully Adjustable | Rate: Adjustable | Rollers: Two 10 1/2" x 18 1/2"
  • Chute: 10 gauge | Lock: 3/4" Spring Loaded Pin