2020 J.P. Carlton Professional Tree Equipment Wood Chippers 2015 (15 In.)

Information

2020 J.P. Carlton Professional Tree Equipment Wood Chippers 2015 (15 In.)

The J.P. Carlton 2015 Apache chipper shares many of the quality design features of its bigger brother – the 2518 – while coming in a smaller, lighter, more compact size.

Aggressive feeding is handled by the exclusive long arm pivot top feed roller. This long arm pivot design keeps the top feed roller close to the drum with a lift path that closely matches the contour of the drum – minimizing the dead space and “hang ups.” The dual feed wheels are powered by three hydraulic drive motors working on two independent circuits to further maximize pulling power.

The 2015 Apache utilizes J.P. Carlton’s exclusive Air Vortex Control to channel and accelerate discharge air, giving the 2015 high discharge velocities and great chip throwing power.

Features may include:
  • Massive 15 ¾” Top Feed Wheel pulls in the logs and brush with ease.
  • Three Hydraulic Feed Motors provide the most pulling power available.
  • LED Taillights mounted high on the infeed out of harm’s way. The 2015’s taillights have heavy-duty covers for extra protection. Wiring is loomed and soldered for added protection and weather resistance.
  • Massive 20" x 15" Throat Opening is the largest in its class and easily handles the largest tops.
  • Rigid 3/8" Feed Table resists bending under the day-to-day stresses of chipping.
  • Dual Lift and Crush Cylinders provide crushing power when necessary and allow easy access to the anvil. Mounting these dual lift cylinders low on the sides allows for a full 360-degree chute rotation.
  • Tandem Hydraulic System provides hydraulic fluid independently to the feed wheel. This system ensures the most power at all times to the feed system. By running this system directly off the engine, all hydraulic functions are available without engaging the drum.
  • Optional Hydraulic Winch gets the big material to the chipper.
  • Heavy-Duty 1½” Feeder Bar
  • Hand Crank Swivel Discharge quickly and easily allows the operator to fill the largest capacity chip trucks corner to corner, or direct the chips to a precise place on the lot.
  • Hand Crank Height Adjustable Discharge Chute allows the operator to quickly adjust the discharge perfectly for any truck.
  • 14 Ply Rated Heavy-Duty Tires
  • Long Arm Pivot Design allows the feed wheel to easily and smoothly open over the largest butt ends.

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers 2015 (15 In.)
  • Sheave: 4/5V9.25 | Channel Mnts: 4" Channel with 5/16" web
  • Available
  • 56 inches | Drum Width w/Fans: 27 inches
  • 100 inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers
  • 2015 (15 In.)
  • Brush
  • Sheave: 4/5V9.25 | Channel Mnts: 4" Channel with 5/16" web
  • John Deere
  • Horsepower: 140HP | Maximum RPM: 2400 RPM
  • 367 Ft Lbs (498 NM)
  • 276 Cubic Inches (4.5L)
  • Medium: Liquid Water/Antifreeze Mixture
  • Two Stage Dry Type
  • Engine: Full Flow Spin On | Hydraulic: 10 Micron Return with Suction Strainer
  • Engine: John Deere | Hydraulic: AW32
  • Four | Lift: Two 2" x 16" with 1" attachments
  • Powerview
  • Twin Disk 11 ½” Over Center
  • 4.19 Inches (106 mm)
  • 5.0 Inches (127 mm)
  • Dexter Spring 10,000 Pound Cap
  • 12 Volt
  • 29 HVD 950 CCA | Box: 10 gauge – lockable
  • Electric with Breakaway Switch
  • 2000 RPM Nominal
  • Drive: Live – Driven off engine | Tank: 3/16" Steel w/baffles, spring and rubber mounted
  • 16 GPM Total Tandem Systems
  • Displacement: 1.5 in cu/rev total from 2 pumps | Drive System: Direct Drive off Engine Mount
  • Aluminum with Electric Fan
  • System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
  • 235/75R17.5 Ld Rng H 4805 # @125 PSI
  • 235/75R17.5 Ld Rng H 4805 # @125 PSI
  • Jackshaft Sheave: 4/5V11.80 | Drum Diameter: 24 inches | Knife: 10 ½” x 5 ½" x 5/8" | Anvil: 2" x 20 1/8″ x ½" AR400 | Drum Fans: 12 ¼" x 2 ½" x 6 ¾" | Throat Opening: 15" x 20" | Main Trailer Tongue: 3" x 6" with 3/8" wall | Main Trailer Frame: 2" x 6" with ¼" wall | Infeed Chute: 1/4" with 2" x 2" x 1/4" tube frame | Infeed Tray: 1/4" Plate w/2" x 2" and 2" x 4" Tube | Fenders: 3/16" checker plate | Feeder Bar: 1 ½" OD x 1/8" wall – removable | Light Brackets: 3/16" with hidden wiring | Hitch Plate: 3/4" Plate adjustable 5" Up/Down
  • Drum Bearings: 2 15/16 inches Pillow Block Bearing | Feed Roller Bearings: 2 7/16 inches Tapered Roller | Feed Roller Shaft: 2 inches
  • 211 inches
  • 100 inches
  • 56 inches | Drum Width w/Fans: 27 inches
  • Five Inch Height Adjustable Pintle
  • Shaft: 3 ½ inches
  • 40 Gallons | Tank: High Density Polyethylene
  • Engine: 13 Quarts | Hydraulic Tank: 18 Gallons
  • 6820 Pounds
  • Jack Stand: 5000 # Cap Screw Type Swing Up | Hydraulic Valve: DO5 Electric Solonoid | Drive Belt: 4/5V1120 | Disk Balance: Precision High Speed Balanced | Number of Knives: 2 | Flow: Separate Systems for Top/Btm Feed | Springs: Two 30" Tight Wound Powder Coated
  • Motors: 46 In Cu Top Two 32 In Cu Bottom | Autofeed: Reversing, Digital, Fully Adjustable | Feed Rate: 110 Feet Per Minute | Feed Rollers Top: 15 ¾" Dia Bottom: 10 ½" Dia | Feed Pivot Bearings: Two 2" Tapered Roller
  • Crank Adjustable Swivel and Height | Discharge Chute: 12 gauge | Discharge Lock: 3/4" Spring Loaded Pin