2020 J.P. Carlton Professional Tree Equipment Wood Chippers 660 Series (6 In.)

Information

2020 J.P. Carlton Professional Tree Equipment Wood Chippers 660 Series (6 In.)

The J.P. Carlton 660 Wood Chipper is the perfect choice when a powerful, ultra-compact machine is needed. The 660’s compact size and weight allow it to be maneuvered right to the work site. The unit’s powerful feed system and 27 horsepower engine provide the muscle to get the job done.

The compact J.P. Carlton 660 is designed and built to go out and chip everyday. The design, features and heavy duty construction of the J.P. Carlton 660 make it the ideal chipper for a rental fleet.

Features may include:

Photos

Highlights

  • Bossier City, Louisiana
  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers 660 Series (6 In.)
  • Sheave: 6/3V5.6 | Mount: Sliding Positive Lock Engagement
  • Available
  • 56 inches
  • 87 inches

Specifications

  • 2020
  • J.P. Carlton Professional Tree Equipment
  • Wood Chippers
  • 660 Series (6 In.)
  • Brush
  • Sheave: 6/3V5.6 | Mount: Sliding Positive Lock Engagement
  • Kohler Model CH740
  • Horsepower: 27 HP | Maximum RPM: 3600
  • 42.7 Ft*Lbs @ 3,000 RPM
  • 44 Cubic Inches (725 cc)
  • Medium: Forced Air
  • Two Stage Dry Type
  • Full Flow Spin On | 10 Micron in Tank Return Filter
  • AW32
  • Two
  • Full Pressure w/Full Flow Filter
  • 3.27 Inches (83 mm)
  • 2.64 Inches (67 mm)
  • Dexter Torflex 2,000 Pound Cap
  • 12 Volt
  • 850 CCA 78DT – 72 | Box: Marine Battery Box
  • Diameter: 26 inches | Thickness: 1 1/2 inches
  • ST175/80R13 Ld Rng C 1760 # @ 50 PSI
  • ST175/80R13 Ld Rng C 1760 # @ 50 PSI
  • Cutter Wheel RPM: 1850 Nominal
  • 5.33 GPM
  • 34 Inches
  • Drive: Live – Driven off engine
  • Displacement: .329 in cu/rev | Drive System: Direct Drive off Engine Mount
  • Track: 4 PSI
  • System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
  • Jackshaft Sheave: 6/3V10.6 | Cutter Head Shaft: 2 1/2 inches | Knife: 7 1/4" x 4 x 1/2" | Anvil: 2 1/2" x 6" x 1/2" AR400 | Chip Throwers: Two 1/4″x 3 1/2" x 3 1/2" x 9 1/2" long | Throat Opening: 6" x 6" | Main Trailer Tongue: 2"x 3" with 3/16" wall | Main Trailer Frame: 2"x 3" with 3/16" wall
  • 124 inches
  • 87 inches
  • 56 inches
  • 2" Coupler
  • Infeed Chute: 12 gauge with 1" tube frame | Folding Infeed Tray: 10 gauge with 1" tube frame | Fenders: 12 gauge | Light Brackets: 10 Gauge
  • 6 Gallons | Tank: High Density Polyethylene rubber mtd | Hydraulic: High Density Polyethylene rubber mtd
  • Tank: 6 Gallons | Engine: 2.1 Quarts
  • 1600 Pounds | Engine: 94 Lbs (43 KG)
  • Jack Stand: 2000 # Cap Screw Type Swing Up | Valve: Series Type | Disk Balance: Precision High Speed Balanced | Springs: 15" Tight Wound Powder Coated | Slide Bearings: Four 1" Hardened Replaceable | Folding Tray Lock: Two 3/4" Spring Loaded Pin
  • Autofeed: Digital Fully Adjustable | Rate: 80 Feet Per Minute – Fully Adjustable | Rollers: 10 1/4" x 5 1/2" | Feeder Bar: 1" OD x .093" wall – removable
  • 360 Adjustable Swivel w/Deflector | Discharge Chute: 12 gauge | Discharge Lock: ¾" Spring Loaded Pin