2020 J.P. Carlton Professional Tree Equipment Stump Cutters SP7015 TRX
- Year 2020
- Make J.P. Carlton Professional Tree Equipment
- Model Stump Cutters
2020 J.P. Carlton Professional Tree Equipment Stump Cutters SP7015 TRX
The SP7015 TRX is truly a go anywhere do everything machine. The SP7015 TRX Stump Cutter on tracks features a standard wireless remote control, 4 speed ground drive system, traction control, and telescoping tracks.
The unit’s track system hydraulically retracts from 48-inches to 35-inches so the operator can maneuver easily through tight situations like a back yard gate. The SP7015 TRX packs big cutting power in a compact unit and produces only 5.3 psi ground pressure.
The four speed track system allows the operator to choose between high speed travel modes and high torque cutting modes at the flip of a switch. The TRX Series from Carlton are redefining versatility.
Features may include:- Patented Turntable Design provides a low center of gravity, keeps the engine level during operation and allows for a giant 70-inch swing travel.
- Extendable and Retractable Tracks hydraulically contract from 48- to 35- inches allowing access to tight working conditions.
- Rubber Tracks Deliver maximum climbing power and minimal lawn disruption.
- Four Speed Ground Drive System – gets you to the stump faster than any other track drive machine while providing precise control at lower speeds and incredible climbing power.
Engine
Engine Power
74 HP Turbocharged
Engine Type
Diesel
Engine Manufacturer
Kohler KDI2504TCR
Emissions
Tier 4
Cylinder Liners
4
Wheels & Tires
Tires, Front Specification
Size: 23×8.5×12
Tires, Rear Specification
Size: 23×8.5×12
Hydraulics
Ground Pressure
5.3 PSI
Dimensions
Dimensions
Jack shaft bearings: 1 11/16" | Track: 9 1/2" X 58" Long
Length
Machine: 130"
Height
Cutter above ground: 43" | Machine: 67"
Width
Machine: 35" Track Width Retracted | 48" Track Width Extended
Depth, Maximum
Cutter below ground: 15"
Cutting Head
Swing 70" arc
Wheels
Cutter diameter with teeth: 26.5" | Cutter thickness: 1 1/2" | Cutter bearings: 2"
Capacities
Fuel Capacity
9.6 gallons
Hydraulic Capacity
6 gallons
Volume
Chip containment volume: 38 cu. ft.
Weights
Weight
Total: 5820 lbs.
Features
Features
Number of teeth on cutter wheel: 48 Razor Teeth | Type of Cutter Teeth: Hard Micro Structure Carbide | Paint: Dupont Imron with Epoxy Primer