2020 J.P. Carlton Professional Tree Equipment Wood Chippers 660 Series (6 In.)
- Year 2020
- Make J.P. Carlton Professional Tree Equipment
- Model Wood Chippers
- Engine Sheave: 6/3V5.6 | Mount: Sliding Positive Lock Engagement
2020 J.P. Carlton Professional Tree Equipment Wood Chippers 660 Series (6 In.)
2020 J.P. Carlton Professional Tree Equipment Wood Chippers 660 Series (6 In.)
The J.P. Carlton 660 Wood Chipper is the perfect choice when a powerful, ultra-compact machine is needed. The 660’s compact size and weight allow it to be maneuvered right to the work site. The unit’s powerful feed system and 27 horsepower engine provide the muscle to get the job done.
The compact J.P. Carlton 660 is designed and built to go out and chip everyday. The design, features and heavy duty construction of the J.P. Carlton 660 make it the ideal chipper for a rental fleet.
Features may include:Engine
Engine
Sheave: 6/3V5.6 | Mount: Sliding Positive Lock Engagement
Engine Manufacturer
Kohler Model CH740
Engine Power
Horsepower: 27 HP | Maximum RPM: 3600
Engine Torque (rpm)
42.7 Ft*Lbs @ 3,000 RPM
Displacement
44 Cubic Inches (725 cc)
Cooling
Medium: Forced Air
Air Cleaner
Two Stage Dry Type
Oil Filter
Full Flow Spin On | 10 Micron in Tank Return Filter
Oil Type
AW32
Cylinder Liners
Two
Lubrication
Full Pressure w/Full Flow Filter
Bore
3.27 Inches (83 mm)
Stroke
2.64 Inches (67 mm)
Drivetrain
Axle Count
Dexter Torflex 2,000 Pound Cap
Electric
Electrical
12 Volt
Battery
Battery
850 CCA 78DT – 72 | Box: Marine Battery Box
Wheels & Tires
Wheels
Diameter: 26 inches | Thickness: 1 1/2 inches
Tires, Front Specification
ST175/80R13 Ld Rng C 1760 # @ 50 PSI
Tires, Rear Specification
ST175/80R13 Ld Rng C 1760 # @ 50 PSI
Operational
Operating Speed
Cutter Wheel RPM: 1850 Nominal
Hydraulics
Hydraulic Flow
5.33 GPM
Hydraulic Capacity
34 Inches
Hydraulic Type
Drive: Live – Driven off engine
Hydraulic Pump
Displacement: .329 in cu/rev | Drive System: Direct Drive off Engine Mount
Ground Pressure
Track: 4 PSI
Maximum Pressure
System Relief: 2500 PSI | Hose: 16,000 PSI Burst – Exceeds SAE 100R2
Dimensions
Dimensions
Jackshaft Sheave: 6/3V10.6 | Cutter Head Shaft: 2 1/2 inches | Knife: 7 1/4" x 4 x 1/2" | Anvil: 2 1/2" x 6" x 1/2" AR400 | Chip Throwers: Two 1/4″x 3 1/2" x 3 1/2" x 9 1/2" long | Throat Opening: 6" x 6" | Main Trailer Tongue: 2"x 3" with 3/16" wall | Main Trailer Frame: 2"x 3" with 3/16" wall
Length
124 inches
Height
87 inches
Width
56 inches
Hitch/Type
2" Coupler
Gauges
Infeed Chute: 12 gauge with 1" tube frame | Folding Infeed Tray: 10 gauge with 1" tube frame | Fenders: 12 gauge | Light Brackets: 10 Gauge
Capacities
Fuel Capacity
6 Gallons | Tank: High Density Polyethylene rubber mtd | Hydraulic: High Density Polyethylene rubber mtd
Oil capacity
Tank: 6 Gallons | Engine: 2.1 Quarts
Weights
Weight
1600 Pounds | Engine: 94 Lbs (43 KG)
Features
Features
Jack Stand: 2000 # Cap Screw Type Swing Up | Valve: Series Type | Disk Balance: Precision High Speed Balanced | Springs: 15" Tight Wound Powder Coated | Slide Bearings: Four 1" Hardened Replaceable | Folding Tray Lock: Two 3/4" Spring Loaded Pin
Feed System
Autofeed: Digital Fully Adjustable | Rate: 80 Feet Per Minute – Fully Adjustable | Rollers: 10 1/4" x 5 1/2" | Feeder Bar: 1" OD x .093" wall – removable
Discharge Type
360 Adjustable Swivel w/Deflector | Discharge Chute: 12 gauge | Discharge Lock: ¾" Spring Loaded Pin